I believe there was some interest in how floor boards
looked/worked. Here are pictures of them on a 750.
I basically followed directions on the VOC site and found I did have to add
a spacer on the brake pedal as it could not be used/adjusted otherwise.

"Gust Jenson"
Never met a person I couldn't learn from,
Gust in Wisconsin
95,750 Virago
83,920 Hackd' Virago (CA Friendship 1)
82, 650 Maxim that runneth not (yet)

"News Flash, you don't have to put a pad on the brake pedal!!!
Just take your trusty Dremel and do a bit of grinding of the right
floorboard undercarriage."

If can't raise the bridge, lower the river - Duh!!! ;-)

Ps. The fuel line Gooped (tm) ;-) to the edge is to protect the board in tight turns.