Pilot Jet Mod

Following " Vitalizing the Virago” article
[or see below]

I found a “Tool & Supply” shop and got me a No. 76 drill bit.
90 cents and very tiny.

I used a pair of needle nose vise grips to hold it vertical.
The pliers have groves or teeth that hold it nice and straight.

I use a Bic metal point pen to hold the pilot jets.
I just removed the plug in the end and jammed the jet inside till flush.

It was very easy and you just need to be careful,
but the pen trick really helps hold everything straight.
Along with the vise grips.

Pilot Jet Mod